Snorkels

Honda Rancher 420 Snorkel Kit 06-07

This snorkel kit is for the 2006-2007 Honda Rancher 420s. This kit uses 1.5" inch ABS piping. There is no re-jetting of the carburetor since the Rancher 420 is fuel injected. The snorkel does not require any cutting of the plastics and uses the stock snorkel inlet in the air box. The kit requires you to remove your gas petcock so you can run your snorkel through the factory cut hole on the side of your plastics. This snorkel kit also has pre-tapped vents so you can extend all your breather lines directly into the snorkel. Your Rancher 420 will still run great after installation of this snorkel kit, but still allowing you to go deep!

Price: $85.00 USD
Shipping: $20.00 USD

1999-2004 Honda Recon 250

This snorkel kit is for the 1999-2004 Honda Recon 250 4x2s. This kit uses 1 1/2 inch ABS piping and should not require jetting, but may in rare cases.. This snorkel uses the stock snorkel inlet in the airbox so you don't have to drill into the airbox. You will need to drill 2 holes using a 2 1/4 inch holesaw to install this snorkel kit. It comes out of the plastics right near the front rack and is stabilized to it using U-Bolts. After installing the snorkel, all you should need to do is adjust the idle that is on the side of the carb. about 1/2 a turn inward using a flat head screw driver. If you have any questions on this snorkel kit, please feel free to email or call us.

Price: $75.00 USD
Shipping: $20.00 USD

05-07 Honda Recon Snorkel Kit

This snorkel kit is for the 05-07 Honda Recons. This kit requires no cutting and uses very minimal space on your Recon's front rack. The kit uses 1.5" ABS Piping and uses the stock air box inlet. You should not need to re-jet your Recon after installation of this kit, but may need to in rare cases.. It's a very simple, and easy snorkel to install with very detailed instructions with pictures.

Price: $75.00 USD
Shipping: $20.00 USD

Legal